13 May
P-type Boron-doped 200nm SiO2 Thermal Oxide Wafer – What are it’s Benefits?

Nowadays, there are different types of cuvettes used for different tests and experiments in laboratories. The cuvettes can be made of different materials such as plastic, glass and quartz. However, quartz cuvettes have always been the first choice when working in the UV range. UV light can be easily absorbed by plastic and glass. For this reason, testing in the UV range with glass and plastic cuvettes will not give you an accurate result. 

 There is never any interference. 

Because these materials easily absorb UV light, they can produce interference. Therefore, cuvettes made from it are not the best option for photometric testing. In the visible light range, the wavelength can remain very long. For this reason, quartz cuvettes are mainly used so that accurate results can be achieved and there are no interferences. If you are looking for UV quartz cuvettes with screw caps and PTFE septa, you have come to the right place. 

P-type Boron-doped 200nm SiO2 Thermal Oxide Wafer


Follow standard cleaning procedures to clean these buckets. 

For photometric measurements it is always necessary to use clean cuvettes. Ultraviolet quartz cells with PTFE screw caps and septacan be cleaned and reused. And that undoubtedly makes them more versatile bucket types. UV quartz cuvettes typically have four different windows that are polished and clean. For this reason, they can help you get accurate photometric measurements. These buckets can be cleaned using the standard cleaning procedure.

A perfect laboratory vessel   A wide range of chemicals and test materials are used in laboratories. Therefore, it is necessary to store and experience them properly. Here the use of UV quartz cells with screw caps and PTFE septa can make a big difference in the expected result. These are laboratory-quality containers. While using them, you can perform your tests safely and accurately. These items come with caps and septa. For this reason, you can store the liquids you need for testing safely and properly.

Get accurate measurements in the UV range 

If you want to get accurate measurements when testing in the UV range, you can achieve amazing results by using P-type Boron-doped 200nm SiO2 thermal oxide wafer. It does not absorb ultraviolet light like plastic and glass. Because of this, interference never occurs, which ultimately helps you get accurate measurements.

Comments
* The email will not be published on the website.
I BUILT MY SITE FOR FREE USING